LASCO Umformtechnik GmbH

Booth number 2.2C36

LASCOs product range includes machines tools and lines for hot, warm and cold forming of solid and sheet metal, automation and manipulation systems.

About us

Since its foundation in 1863 LASCO has been devoting its efforts to the development and manufacture of economical machines for forming tasks in the metal industry and for the production of wall building materials. LASCO has been one of the leading system providers of a comprehensive range of production lines, individual units and automation technology in the global market.

Our customers' demands and expectations are the yardstick for our activities. Our solid technical expertise and experience allow us to find and realise the optimum solution for individual requirements. This applies to the manufacture of machines or lines and automation technology as well as to the modernisation of existing lines.

With LASCO not only as a supplier but also a partner, customers continue to enhance their competitiveness in the global market for decades to come.

LASCO Umformtechnik GmbH
Hahnweg 139
96450 Coburg

Phone: +49 9561 6420
Fax: +49 9561 642333

Anton Ohlert
1 Schipkovskij Pereulok 20, 8. Etage
115093 Moskau

Phone: +7 495 9612061
Fax: +7 495 9612071

Products and Services

Rugged construction, demanding jobs: LASCO offers a comprehensive range of traditional forming machines that are adapted to individual customer requirements and can be automated:

  • Hydraulic presses for solid forming (Pre-forming/multipurpose presses, VP/VPA/VPE, Piercing and drawing press VPZ, Calibrating press KP, Cold extrusion press KFP)
  • Hydraulic presses for sheet-metal forming (Universal/ deep drawing press and coining press TZP/TSP)
  • Hydraulic hammers (Double-acting hammer HO-U, Counterblow hammer GH)
  • Screw presses (Screw press SPR/SPP)
  • Pre-forming lines (Pre-forming line AR-D, Fully automatic stretching line AR, Electric upsetter EH/EV)
  • Forging rolls (Forging/cross wedge roll RCW/QKW, Axial feed cross roll AVQ)
  • Automation

Hydraulic deep-drawing presses are particularly suited for difficult drawn parts and special materials. Specialized in hydraulically driven forming units, LASCO designs deep-drawing presses that are customized to meet even highest demands of sheet metal forming. Press force 4,000 – 40,000 kN.

Further reading


The hydraulic double-acting hammer HO-U is an ideal forming unit for the forging industry from a technical and economical point of view. Maximum forming force is generated with minimum effort. Due to its forming characteristics, the hydraulic double-acting hammer is a universal forging unit for a wide range of applications.

Further reading


The cross wedge roll is designed for the preforming of round material and is ideally suited for the finish-forming of e. g. gear shafts, stepped as well as hollow shafts. The QKW can be used both as a stand-alone unit and as an integral part of an automated forging line.
Roller diameter 350 – 1,400 mm.

Further reading

News & Innovations

Remote assistance system - real-time collaboration

LASCO machines and lines are characterized by high availability and operational safety. In order to guarantee this in the long term, it is particularly important to us to offer our customers the fastest possible assistance and to be able to provide them with competent support. Remote diagnosis provides
the service technician with valuable information on the actual condition of the system.

The system represents the technically superior alternative to conventional means of communication. Video stream and SmartGlasses enable bidirectional image and sound transmission from the first-person perspective as well as fast and direct troubleshooting by the technician on site. This reduces downtime and ideally avoids production inter-
ruptions. The virtual support by a LASCO expert during the execution of the individual work steps significantly increases the quality of the measure. Furthermore, upcoming repair work can be prepared in a targeted manner.

Further reading
Virtual Commissioning - simulation of complex systems

Already in the engineering phase, automation
systems are optimized virtually for commissioning.
LASCO uses real process parameters for this
purpose. Long before assembly begins, all machine sequences and operating conditions are simulated on the computer.

The use of this method in the development process of machines/production lines detects and eliminates errors at an early stage.

This minimizes correction loops in the engineering stage. Cost-optimized and shortened commissioning on site are the beneficial outcomes.

The "virtual commissioning" technology can also be used for planned changes to the setup of the production line. Changes of products and production processes can already be tested and adapted virtually parallel to production.

Further reading

Click here if you notice an image that violates copyright or privacy rights.

Get in contact

We only use functionally necessary cookies and the web analysis tool Matomo in order to optimally design and continuously improve our website for you. By continuing to use our website, you agree to this. Further information and an objection possibility can be found here: Data protection